VLA210 Line Array
VLA210 Line Array
Item Code: VLA210
Description
The VLA210 Line Array system is made up of 2 x 10" LF, 2 x 6.5 MF airtight and 2 x 1.73" compression drivers. This system uses advanced branching map technique, making the MF and HF output the same in SPL quantity. With the sub-thin enclosure, the vertical point is only 12" (single enclosure), therfore allowing sound to be delivered to greater distances. When the multi-enclosure are arranged together, the wave interfere between the enclosures can be reduced to the minimum. The HF has no power crossover network and the LF requires a processor to divide the frequencies. Applications for this system include stadiums, sporting arenas, music festivals, concerts, nightclubs and band rooms.
Increase the LF by using this system alongside the VLA218 Subwoofer.
Key Features
FEATURES
- 3-way small line array system
- High efficiency energy output
- Far coverage
- Professional suspension, safe and reliable
- Fast installation, waterproof and heat resistant
SYSTEM SPECIFICATIONS
Frequency Response: 80 Hz - 18 kHz
Sensitivity: MF / HF 108 dB, LF 92 dB SPL (1W @ 1m)
Nominal Impedance: MF / HF 8 ohms, LF 8 ohms
Power Handling: MF / HF 280 watts (rms), 560 watts (program), 1120 watts (peak), LF 400 watts (rms), 800 watts (program), 1600 watts (peak)
Maximum SPL: MF / HF 132 dB, LF 118 dB
Nominal Coverage Angle (-6 dB): horizontal 110 degrees, maximum vertical splay 12 degrees
Crossover Frequency: MF / HF 2 kHz, MF/LF 350 Hz
Recommended High Pass Filter: high pass => 80 Hz, 24 dB / octave
DRIVER SPECIFICATIONS
Low Frequency (neodymium magnet): 2 x 10 (in) 260 mm dia, 75 mm (3in) voice coil dia
Mid Frequency (neodymium magnet): 2 x 6.5 (in) 170 mm dia, 44 mm (1.5in) voice coil dia
High Frequency (neodymium magnet): 2 x 1.73 (in) 44 mm voice coil dia, 23 mm (1in) throat dia
PHYSICAL SPECIFICATIONS
Enclosure Construction: 15 mm birch plywood
Finish: Wear-resistant textured black paint
Grille: Powder coated perforated steel, foam backed
Suspension Hardware: Proprietary J Audio rigging system
Input Connectors: Speakon NL4 x 2
Dimensions H x W x D: 325 mm x 725 mm x 565 mm
Net Weight: 36.5 kg